Jinan Firm Laser Machine Safety Guide
2015-12-08 15:42:40 From:www.firmcnc.com Views:
Jinan Firm Laser Machine Safety Guide
Jinan Firm Laser Machine Safety Guide
1. Ensure using the safe voltage, need conform to the earthed requirements
2. Please don't run the machine in humidity greater more than 60% environment.
3. The environment temperature should keep in 5 to 35 degrees Centigrade.
4. Before running equipment, to be sure the cooling system had already run well.
5. While working, please don't stretch hands into the workplace.
6. Forbid sundries to fall into the linear bearing.
7. Please don't regulate the electric current while working.
8. Forbid the attendant leaving the work place while working.
9. When the laser engraving machine works for three hours in succession, can not work again until after shutting down for half an hour.
10. Please not to use it when the thunder.
11. Forbid to pull out and insert the power cable and the communication cable undEr the electric state.
12. Such abnormal phenomena as cannot find any laser or the coordinate system collides while operating, should cut off the power first, start the machine after fixing a
breakdown.
13. Forbid dismantle the machine by yourself or maintain it by person who is not
authorized by our company.
14. The linear bearing, the lens and the reflector should be cleared up regularly.
15. Please keep the machine clean and dry.