The machine is with welded steel tube structure, the thickness of the steel tube up to 6mm, this machine is specially designed for carving and engraving on cabinet, doors and for indoor decoration. Can be used for mass-processing with Vacuum holding way and dust collector. We use top quality components for the machine, such as HSD air cooling spindle, Delta Inverter, Hiwin linear, France schneider contactor and leakage protector and so on, to keep the machine in the best condition even after working for many years.
1). The machine’s body is strong, high-precision, reliable and durable.
2).Taiwan high-precision ball screw, which moving smoothly, to ensure the machine’s high precision.
3). Well-known HSD air cooling spindle, strong cutting ability, low noise, to ensure the machine working
for long time.
4). High-performance driven motor to ensure the machine’s high speed and accuracy.
5). Breakpoint specific memory to keep the carving status when power off, processing time
forecast and other functions in case of the accidental power outages
6). Lubrication system and separated control system, easy to operate.
7). Perfect design, top quality accessories, to minimize the machine’s failure rate.
Brand |
Firm |
Model |
FM-1530 |
Engraving area |
|
Working Form |
Full-automatic |
Spindle Power |
3.0KW water cooling spindle |
Spindle Rotate(rpm) |
6000~24000 |
Motor Driver |
Stepper motor (Chinese servo motor or imported servo motor is optional) |
Tool Diameter(mm) |
Ø3.175,Ø4,Ø6, Ø12.7mm |
Machine Structure |
Industry square tube structure |
Transmission System |
Imported ball screw or high accuracy gear rack |
X,Y,Z Rail |
Imported square rail |
Mechanical Accuracy |
<0.03/300mm |
Engraving Speed(mm/min) |
8000~12000mm/min |
Feeding Speed |
manual |
Data Transmission |
PC connect |
Support Format |
G code or HPGL |
Working Voltage |
AC220V/50Hz or 380V/50Hz |
Support Format |
G Code or HPGL |
Range of Application |
Woodworking relief engrave ,Cutting , Hollow |
Machine Net Weight |
1200Kg |
1.After powder coating(not just painting), the table is leveled by using the level and the adjustment feet.
2.The surface of square rail and rack are polished by whetstone to remove burrs.
3.After drilling on the square rail, the indicator and levelling ruler to adjust the parallelism and the flatness, by which the accuracy is up to 0.1mm.
4.After install the rack, to test and make sure the accuracy of the straightness is up to 0.1mm.
5.The installment of gantry’ rack and rack is the same as the table.
6.The parallelism of the head’s screw and square rail is up to 0.05mm.
7.When debugging the diagonal lines, the Fang Gun is required, and the accuracy should be 0.3mm.
Water-proof plastic film package with foam protection in each corner.
Solid Seaworthy Wood Box Package with Steel Belt.
Save space as much as possible for container loading.
Jinan FirmCNC Equipment Co.,Ltd
Tel:+86-0531-69986330
Fax:+86-0531-69986330
Mob:+86-18560216660
Email:admin@firmcnc.com
Website:www.firmcnc.com
Address:A505,Jingliu Road,Huaiyin District,Jinan,Shandong,China